These are the ways to avoid egg rolls sticking to the automatic egg rolls machine

Preparation before operation

Mold preheating: ensure that the mold of the egg rolls machine is fully preheated to the appropriate temperature, and the general preheating time is 3-5 minutes, so that the egg rolls can be better formed in the baking process and reduce adhesion.

1. Mold lubrication: evenly apply a thin layer of edible oil or special anti sticking spray on the mold surface. After application, it is necessary to inject grout as soon as possible to avoid oil sticking to the mold, otherwise it will increase the difficulty of demolding.

2. egg rolls raw material adjustment

Increase the oil content: properly increase the proportion of edible oil in the egg rolls flour paste, which will help to better separate the Chicken rolls during baking and reduce adhesion.

3. Optimize the formula proportion: ensure that the formula proportion of egg rolls raw materials is appropriate, and avoid high sugar or insufficient flour, which may lead to egg rolls adhering to the mold.

4. Operation process control

Control the baking time and temperature: according to the thickness and formula of the egg rolls, precisely control the baking time and temperature. Generally speaking, the baking time should be about 30 seconds, and the temperature should not be too high to avoid the Chicken rolls being burnt inside or outside or adhering to the baked egg roll.

5. Constant speed operation: when operating the egg rolls machine, the action should be kept at a constant speed to ensure that the egg rolls machine is heated evenly, to prevent the occurrence of paste or uneven raw and cooked conditions, so as to reduce adhesion.

6. Cleaning and maintenance

Regularly clean the mold: after each use, timely clean the mold of the Chicken rolls machine, remove the residual egg rolls chips and grease, and keep the mold surface clean and smooth.

7. Check the condition of the mold: Regularly inspect the surface of the mold for damage, scratches, or coating peeling. If necessary, repair or replace the mold in a timely manner.