How is the automation system of the fully automatic Phoenix coiling machine maintained?

Daily cleaning and inspection

Cleaning equipment: After the operation is completed, cleaning work should be carried out immediately, using a damp cloth or specialized cleaning tools to clean the residue on the equipment, especially the heating part, to prevent residue from burning and affecting equipment performance and food safety.

Check the power supply: Before starting up every day, check if the power supply is working properly to ensure that there are no loose or damaged wires.

Check lubrication: Regularly check whether the operating parts of the equipment are coated with sufficient lubricating oil, which is crucial for maintaining the good working condition of the machine.

Regular maintenance

Reset setting: various switches or keys on the operation panel shall be adjusted to the initial state after use to prevent damage caused by rapid startup of the equipment when the next boot is started.

Record problem: If any abnormal performance is found during the use of the equipment, it should be promptly recorded and the maintenance personnel should be notified for handling. Non professionals should not disassemble and repair it at will.

Power off maintenance: When cleaning and maintaining equipment, it is necessary to ensure that the equipment is in a shutdown state and the power is disconnected to prevent electric shock accidents or more serious electrical damage.

Fault handling

Timely shutdown inspection: Once abnormal operation or malfunction of the equipment is detected, it should be immediately shut down and inspected.

Simple troubleshooting: For some simple problems such as blockages, they can be solved by themselves; For complex problems, professional maintenance personnel must be hired to handle them.

Long term maintenance when not in use

Cover protection: If the device is not used for a long time, it should be covered with a dust cover to prevent dust and moisture from corroding the device.

Regular power on: Even if not in use for a long time, it is necessary to regularly power on and run the equipment to check whether its various functions are normal, and at the same time, it can prevent components from rusting or getting stuck due to long-term disuse.