Guangzhou Yitong Chicken rolls Machine Factory: Precautions for the use of automatic Chicken rolls machine include these aspects!

Precautions for the use of automatic Chicken rolls machine include the following aspects:

1、 Safe operation:

1. Wear labor protection equipment: Operators must wear appropriate work clothes, work hats, masks and other labor protection equipment.

2. Prevention of accidental injury: During the operation, other objects or fingers should not be inserted to avoid accidental injury.

3‌. Electrical safety: It is prohibited to directly touch the machine with wet hands or hands contaminated with oil to prevent electric shock or circuit short circuit.

4. Fault handling: When the machine malfunctions or is abnormal, it should be stopped immediately for inspection and maintenance personnel should be notified for repair.

5. Cleaning and maintenance: When cleaning and maintaining equipment, it is necessary to keep the equipment in a stopped state and disconnect the power supply.

‌

2、 Operating procedures:

1. Preheating equipment: Ensure that the equipment has been preheated to the appropriate temperature before use, usually for 5-10 minutes.

2. Temperature control: Do not adjust the temperature to the highest during low temperature preheating to avoid that the center part will solidify first, which will lead to uneven thickness of Egg cakes.

3. Paste distribution: The blended eggs and flour raw materials should be evenly distributed on the non stick heating plate of the machine to ensure the uniform thickness of Egg cakes.

4. Thickness of Egg cakes: The thickness of Egg cakes should be able to connect with the heating plate and be buckled. If it is too thick, it may cause the outside to be pasted and the inside to be uncooked.

5. Temperature adjustment: the temperature adjustment knob should be kept in the center position to ensure that the Egg cakes is evenly baked.

3、 Maintenance and upkeep:

1. Regular cleaning: after use, the Chicken rolls mold should be cleaned and coated with edible oil to prevent rust and adhesion.

2. Check the heating tube and electrical connections: Regularly inspect the heating tube and electrical connections to ensure that they are not damaged or loose.

3. Storage precautions: When storing, ensure that the welding joints and other components are not rusted to prevent the machine from getting damp and moldy.